What should be paid attention to in the marking process of nanosecond solid-state UV laser?

The laser wavelength of the UV laser marking machine is 355nm. The laser is a cold light source, so it is often called a cold light laser marking machine. The focusing spot is extremely small, and the processing heat affected zone is very small. It is more suitable for deep processing of materials that are sensitive to thermal effects, so it can be used for ultra-fine marking, engraving, and special material marking. The applicable materials are very wide, which solves the problems of insufficient fineness and poor effect when marking many materials with optical fiber, green light, carbon dioxide and MOPA laser marking machines. In order to ensure that the UV laser marking machine can work more efficiently and for a longer time, what related matters should be paid attention to during the use process?

UV laser marking machine

1. Although the effect of UV laser marking machine processing products will not subside due to environmental factors, the processing environment still needs to be paid attention to. The environment, temperature and humidity of the processing site should meet the standards. Try to keep the ambient temperature at 10℃-35℃ to ensure that the place is clean and tidy, and the work surface should also be kept tidy to ensure that the processing materials are not polluted.

2. The customer must provide the main power supply to support at least 2500W AC single-phase power supply, and the main power cord of the equipment provided by our company must be installed on an air switch for protection, and the use of triangular plugs is strictly prohibited.

3. Before processing, the UV laser marking machine should be inspected as a whole, and the cooling system, optical path system and field ytterbium of the machine should be maintained. Ensure the normal work of each system and ensure the processing effect.

Fourth, the main power supply provided by the customer must have a ground wire, and virtual connection is strictly prohibited!

5. It is recommended to use deionized water for cooling water in the circulating water tank. If there is no deionized water, distilled water can be used instead; the circulating cooling water should be replaced in time after a period of use (it is recommended to change the water at least once every two weeks), so as not to affect the laser efficiency.

En comparación con otros tipos de máquinas de marcado, la máquina de marcado por láser UV es más costosa y la potencia de la máquina de marcado por láser UV es pequeña, por lo que no se recomienda que los clientes la utilicen para marcar hardware de metal y otros productos que requieren alta potencia. . Por lo tanto, debemos prestar más atención a las precauciones habituales de operación y mantenimiento del equipo, a fin de brindar mayores ganancias a los usuarios.