El accesorio giratorio es un buen complemento para la máquina de grabado de marcado láser

Accesorio giratorio, también llamado dispositivo giratorio, como todos sabemos, el accesorio giratorio es un buen complemento para la máquina de grabado de marcado láser, se utiliza para grabar o marcar en algunos objetos redondos o cilíndricos. Por lo general, el dispositivo giratorio no incluye en la configuración estándar, pero si necesita grabar o marcar en algunos objetos redondos o cilíndricos, será un elemento necesario.

Método de instalación del accesorio giratorio

El accesorio giratorio se puede dividir en dos tipos según el método de instalación. Uno es un accesorio giratorio de instalación interna, otro es un accesorio giratorio de instalación externa. Veamos qué aspecto tienen.

Dispositivo rotatorio de iInstallation interno

Internal installation means, in the first time to assemble the laser machine, the drive and power source parts of rotary attachment will be installed into the main box of the machine, only left the main part of the rotary device outside for use.

external installation rotary device

If you have a laser machine already without rotary attachment, now you want to install it, then you can choose the external installation rotary device. It’s very easy, just plug in the wire into right places, it can be used.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

90-degree Rotary Attachment of Laser Marking Engraving Machine

According to the rotary angle classification, the rotary attachment can be divided into the 90-degree angle rotary attachment and 180-degree angle rotary attachment.

180-degree Rotary Attachment of Laser Marking Engraving Machine

Then we may have a query, Is there any function or character difference between these two rotary attachments? Of course, there are slight character differences between them. The 90-degree angle rotary attachment is a little more stable, the 180-degree angle rotary attachment is a little more flexible as it can be rotary with a larger angle. But these differences really matters not too much. You may choose one of the styles you like randomly.

Rotary Submeue Under Laser Menu

At last, let see the software operation support for the rotary attachment of laser marking engraving machine. It is also very easy. Just choose the “rotary marking” submenu under “laser” main menu. and then set the “rotary marking” parameters. That’s all about the rotary attachment of laser marking engraving machine. Hope our introduction could help you know more about the laser machine system and know better how to use the rotary attachment. If any queries or questions, welcome to communicate with us by email